mitsubishi Euro 6 Repair Tips
Search: Euro 6 mitsubishi
Results 7
Results 7
Make | Model Ch. | Symptom | Problem Solution | Solution | By: |
---|---|---|---|---|---|
Mitsubishi | Euro 6 CT2146TX | Dead - no line drive | Carbonised glue around fop chip had caused corrosion of earth track to line gen cct | ||
Mitsubishi | Euro 6 CT2145BM | No colour | LO601 bandpass transformer | ||
Mitsubishi | Euro 6 | No sound | Check for 12v pin 1 & 15.8v at pin 9 of IC361 AN5265 audio o/p chip. If no 15.8v, check C363 1000µ 25v, C915 470µ 25v, R912 0R82 ½w fusible. D911 BYW95B o/c. If no 12v check R368 & R371 100R ½w & zener D362. Also check Q302 JC501QR or IC101 M51496P | ||
Mitsubishi | Euro 6 | No col | IC252 TDA3565 running hot and faulty | ||
Mitsubishi | Euro 6 | Int shutdown & poor response to R/C & OSD corrupted | C960 dry joints | ||
Mitsubishi | Euro 6 | Int patterning | C920 470µ 25v | ||
Mitsubishi | Euro 6 | Dead with squeal | s/c across lop traced to Loptx s/c between pins 1 (HT) & Chassis pin 7 ; LOPTx 334B08109 = HR7685 £13.25 CPC |